Fixing "disappearing_sliver" bug.

A regression test is included.
This is a bug in q3map2.  Please read
regression_tests/q3map2/disappearing_sliver/README.txt for more info.

git-svn-id: svn://svn.icculus.org/gtkradiant/GtkRadiant/trunk@363 8a3a26a2-13c4-0310-b231-cf6edde360e5

diff --git a/libs/mathlib/mathlib.c b/libs/mathlib/mathlib.c
index b9b7b869f18bcc087e3f7df611d57a073e02c6cd..33945cde4ed22436a696c2942e6998c70f954d9c 100644 (file)
--- a/libs/mathlib/mathlib.c
+++ b/libs/mathlib/mathlib.c
@@ -127,7 +127,7 @@ void _VectorCopy (vec3_t in, vec3_t out)
 }
 
 vec_t VectorNormalize( const vec3_t in, vec3_t out ) {
-       vec_t   length, ilength;
+       vec_t   length;
 
        length = (vec_t)sqrt (in[0]*in[0] + in[1]*in[1] + in[2]*in[2]);
        if (length == 0)
@@ -136,10 +136,9 @@ vec_t VectorNormalize( const vec3_t in, vec3_t out ) {
                return 0;
        }
 
-       ilength = 1.0f/length;
-       out[0] = in[0]*ilength;
-       out[1] = in[1]*ilength;
-       out[2] = in[2]*ilength;
+       out[0] = in[0]/length;
+       out[1] = in[1]/length;
+       out[2] = in[2]/length;
 
        return length;
 }

diff --git a/regression_tests/q3map2/disappearing_sliver/README.txt b/regression_tests/q3map2/disappearing_sliver/README.txt
new file mode 100644 (file)
index 0000000..5914cc3
--- /dev/null
+++ b/regression_tests/q3map2/disappearing_sliver/README.txt
@@ -0,0 +1,164 @@
+DESCRIPTION OF PROBLEM:
+=======================
+
+The example map, maps/disappearing_sliver.map, contains an example of this bug.
+There are 6 walls in the map, and one tall thin triangular sliver brush in the
+middle of the room (7 brushes total).  Only one face of the sliver in the
+middle of the room is a draw surface.  The bug is that this sliver surface is
+not rendered in the compiled BSP.  Note that the sliver brush was hand-crafted
+to demonstrate the bug.  If you re-save the map, Radiant might adjust the
+order in which the planes on the brush are defined, and this might, as a side
+effect, get rid of the immediate bug.
+
+To trigger the bug, compile the map; you don't need -vis or -light.  Only
+-bsp (the first q3map2 stage) is necessary to trigger the bug.  The only
+entities in the map are 2 lights and a single info_player_deathmatch, so the
+map will compile for any Q3 mod.
+
+
+SOLUTION TO PROBLEM:
+====================
+
+Several days were spent studying this problem in great detail.
+
+The fix for this problem was to make the outcome of the VectorNormalize()
+function libs/mathlib/mathlib.c more accurate.  The previous code in this
+function looks something like this:
+
+  vec_t length, ilength; // vec_t is a typedef for 32 bit float.
+
+  /* Compute length */
+
+  ilength = 1.0f/length;
+  out[0] = in[0]*ilength;
+  out[1] = in[1]*ilength;
+  out[2] = in[2]*ilength;
+
+As you can see, we are introducing a lot of extra error into our normalized
+vector by multiplying by the reciprocal length instead of outright dividing
+by the length.  The new fixed code looks like this:
+
+  out[0] = in[0]/length;
+  out[1] = in[1]/length;
+  out[2] = in[2]/length;
+
+And we get rid of the recpirocal length ilength altogether.  Even the
+slightest math errors are magnified in successive calls to linear algebra
+functions.
+
+
+POSSIBLE SIDE EFFECTS:
+======================
+
+The only negative side effect is that compilation of a map might take longer
+due to an increased number of divide operations.  (I'm actually not sure if
+that is indeed the case.)  Another side effect might be that if you're used
+to a map being broken (missing triangles) or having "sparklies" between
+brushes, those might be gone now.  :-)
+
+
+IN-DEPTH DISCUSSION:
+====================
+
+VectorNormalize() is used very frequently in Radiant and tools code.  My goal
+for this fix was to make the least amount of code change but still be able to
+demonstrate a significant improvement in math accuracy (including a fix to
+the test case).  At the same time don't risk that any other bugs pop up as a
+side effect of this change.
+
+Here is the sequence of calls (stack trace) that cause the example bug to
+happen:
+
+  main() in main.c -->
+    BSPMain() in bsp.c -->
+      LoadMapFile() in map.c -->
+        ParseMapEntity() in map.c -->
+          ParseBrush() in map.c -->
+            FinishBrush() in map.c -->
+              CreateBrushWindings() in brush.c -->
+                ChopWindingInPlace() in polylib.c
+
+What basically happens in this sequence of calls is that a brush is parsed
+out of the map file, "infinite" planes are created for each brush face, and
+then the planes are "intersected" to find the exact vertex topologies of each
+brush face.  The vertex topology of the visible face of the sliver (in the
+example map) gets computed with a significant amount of math error.  If we
+did our math with infinite precision, the sliver face would have the following
+vertices:
+
+  (67 -1022 0)
+  (88 -892 -768)
+  (134 -1015 0)
+
+In fact, if you open the map file (disappearing_sliver.map), you can actually
+see these exact points embedded in the third plane defined on brush 0.
+
+I managed to print out the actual computed vertices of the sliver face before
+and after this bug fix.  Basically this is printed out after all the
+ChopWindingInPlace() calls in the above stack trace:
+
+  (66.984695 -1021.998657 0.000000)
+  (87.989571 -891.969116 -768.174316)
+  (133.998917 -1014.997314 0.000000)
+
+(If you want to print this out for yourself, print out the coordinates of the
+winding_t "w" parameter right after the ChopWindingInPlace() call in
+CreateBrushWindings() in brush.c.)
+
+The same vertices after the bugfix have the following coordinates:
+
+  (67.000229 -1021.998657 0.000000)
+  (88.000175 -891.999146 -767.997437)
+  (133.999146 -1014.998779 0.000000)
+
+As you can see, the vertices after the fix are substantially more accurate,
+and all it took was an improvement to VectorNormalize().
+
+The problem before the fix was the Z coordinate of the second point, namely
+-768.174316.  There is a lot of "snap to nearest 1/8 unit" and "epsilon 0.1"
+code used throughout q3map2.  0.174 is greater than the 0.1 epsilon, and that
+is the problem.
+
+  main() in main.c -->
+    BSPMain() in bsp.c -->
+      ProcessModels() in bsp.c -->
+        ProcessWorldModel() in bsp.c -->
+          ClipSidesIntoTree() in surface.c -->
+            ClipSideIntoTree_r() in surface.c -->
+              ClipWindingEpsilon() in polylib.c
+
+Now what ClipWindingEpsilon() does is, since -768.174316 reaches below the
+plane z = -768 (and over the 0.1 epsilon), it clips the winding_t and creates
+two points where there used to be only one.
+
+  main() in main.c -->
+    BSPMain() in bsp.c -->
+      ProcessModels() in bsp.c -->
+        ProcessWorldModel() in bsp.c
+          FixTJunctions() in tjunction.c
+            FixBrokenSurface() in tjunction.c
+
+FixBrokenSurface() realizes that there are two points very close together
+(in our case, since they were "snapped", the are coincident in fact).
+Therefore it reports the surface to be broken.  The drawable surface is
+deleted as a result.
+
+
+RELATED BUGS:
+=============
+
+A lot of the math operations in the Radiant codebase cut corners like this
+example demonstrates.  There is a lot more code like this that can be
+improved upon.  In fact, it may make sense to use 64 bit floating points in
+some important math operations (and then convert back to 32 bit for the return
+values).  Plans are to look at similar code and improve it.
+
+The following "issue" was discovered while doing research for this bug.
+If FixBrokenSurface() sees two points very close together, it attempts to
+partially fix the problem (the code is not complete) and then returns false,
+which means that the surface is broken and should not be used.  So in fact
+it attempts to fix the problem partially but none of the fixes are used.
+It seems that FixBrokenSurface() should be fixed to completely fix the case
+where there are two close points, and should report the surface as fixed.
+This might be a destabilizing change however, so if this is indeed fixed, it
+may make sense to activate the fix only if a certain flag is set.

diff --git a/regression_tests/q3map2/disappearing_sliver/maps/disappearing_sliver.map b/regression_tests/q3map2/disappearing_sliver/maps/disappearing_sliver.map
new file mode 100644 (file)
index 0000000..821497d
--- /dev/null
+++ b/regression_tests/q3map2/disappearing_sliver/maps/disappearing_sliver.map
@@ -0,0 +1,84 @@
+// entity 0
+{
+"classname" "worldspawn"
+// brush 0
+{
+( -704 -1152 0 ) ( 4480 -1152 0 ) ( -704 -1152 -768 ) common/caulk 0 0 0 0.500000 0.500000 134217728 4 0
+( 67 -1022 0 ) ( 67 -4096 0 ) ( 88 -892 -768 ) common/caulk 0 0 0 0.500000 0.500000 134217728 4 0
+( 67 -1022 0 ) ( 88 -892 -768 ) ( 134 -1015 0 ) radiant_regression_tests/tile 0 0 0 0.500000 0.500000 134217728 0 0
+( 88 -892 -768 ) ( 88 -4096 -768 ) ( 134 -1015 0 ) common/caulk 0 0 0 0.500000 0.500000 134217728 4 0
+( 134 -1015 0 ) ( 134 -4096 0 ) ( 67 -1022 0 ) common/caulk 0 0 0 0.500000 0.500000 134217728 4 0
+}
+// brush 1
+{
+( 584 -640 -768 ) ( 520 -640 -768 ) ( 520 -1160 -768 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( 528 -1160 320 ) ( 528 -640 320 ) ( 592 -640 320 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( 528 -1152 0 ) ( 592 -1152 0 ) ( 592 -1152 -768 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( 520 -1160 0 ) ( 520 -640 0 ) ( 520 -640 -768 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( 584 -640 0 ) ( 520 -640 0 ) ( 520 -640 -768 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( 512 -640 0 ) ( 512 -1160 0 ) ( 512 -1160 -768 ) radiant_regression_tests/tile 0 0 0 0.500000 0.500000 0 0 0
+}
+// brush 2
+{
+( 512 -552 -768 ) ( -296 -552 -768 ) ( -296 -640 -768 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( -296 -640 320 ) ( -296 -552 320 ) ( 512 -552 320 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( -296 -640 320 ) ( 512 -640 320 ) ( 512 -640 -768 ) radiant_regression_tests/tile 0 0 0 0.500000 0.500000 0 0 0
+( 512 -640 320 ) ( 512 -552 320 ) ( 512 -552 -768 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( 528 -632 320 ) ( -280 -632 320 ) ( -280 -632 -768 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( -512 -536 320 ) ( -512 -624 320 ) ( -512 -624 -768 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+}
+// brush 3
+{
+( -512 -648 -768 ) ( -536 -648 -768 ) ( -536 -1152 -768 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( -536 -1152 320 ) ( -536 -648 320 ) ( -512 -648 320 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( -536 -1152 320 ) ( -512 -1152 320 ) ( -512 -1152 -768 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( -512 -1152 320 ) ( -512 -648 320 ) ( -512 -648 -768 ) radiant_regression_tests/tile 0 0 0 0.500000 0.500000 0 0 0
+( -512 -640 320 ) ( -536 -640 320 ) ( -536 -640 -768 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( -520 -648 320 ) ( -520 -1152 320 ) ( -520 -1152 -768 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+}
+// brush 4
+{
+( 512 -640 320 ) ( 24 -640 320 ) ( 24 -1152 320 ) radiant_regression_tests/tile 0 0 0 0.500000 0.500000 0 0 0
+( 48 -1152 328 ) ( 48 -640 328 ) ( 536 -640 328 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( 24 -1152 440 ) ( 512 -1152 440 ) ( 512 -1152 328 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( 512 -1152 440 ) ( 512 -640 440 ) ( 512 -640 328 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( 512 -640 440 ) ( 24 -640 440 ) ( 24 -640 328 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( -512 -640 464 ) ( -512 -1152 464 ) ( -512 -1152 352 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+}
+// brush 5
+{
+( -328 -896 -776 ) ( -512 -896 -776 ) ( -512 -1152 -776 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( -512 -1152 -768 ) ( -512 -896 -768 ) ( -328 -896 -768 ) radiant_regression_tests/tile 0 0 0 0.500000 0.500000 0 0 0
+( -512 -1152 -768 ) ( -328 -1152 -768 ) ( -328 -1152 -776 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( -512 -896 -768 ) ( -512 -1152 -768 ) ( -512 -1152 -776 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( 512 -1152 -768 ) ( 512 -896 -768 ) ( 512 -896 -776 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( -368 -640 -824 ) ( -856 -640 -824 ) ( -856 -640 -960 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+}
+// brush 6
+{
+( -512 -1168 320 ) ( -512 -1584 320 ) ( -512 -1584 0 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( 1152 -1152 320 ) ( 176 -1152 320 ) ( 176 -1152 0 ) radiant_regression_tests/tile 0 0 0 0.500000 0.500000 0 0 0
+( 512 -1576 320 ) ( 512 -1160 320 ) ( 512 -1160 0 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( 208 -1160 320 ) ( 1184 -1160 320 ) ( 1184 -1160 0 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( 176 -1568 320 ) ( 176 -1152 320 ) ( 1152 -1152 320 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+( -256 -1152 -768 ) ( -520 -1152 -768 ) ( -520 -1192 -768 ) common/caulk 0 0 0 0.500000 0.500000 0 4 0
+}
+}
+// entity 1
+{
+"light" "3000"
+"origin" "0 -768 -480"
+"classname" "light"
+}
+// entity 2
+{
+"angle" "270"
+"origin" "0 -712 -640"
+"classname" "info_player_deathmatch"
+}
+// entity 3
+{
+"classname" "light"
+"origin" "0 -832 160"
+"light" "3000"
+}

diff --git a/regression_tests/q3map2/disappearing_sliver/textures/radiant_regression_tests/tile.tga b/regression_tests/q3map2/disappearing_sliver/textures/radiant_regression_tests/tile.tga
new file mode 100644 (file)
index 0000000..2154015
Binary files /dev/null and b/regression_tests/q3map2/disappearing_sliver/textures/radiant_regression_tests/tile.tga differ