}
+struct HelpOption
+{
+ const char* name;
+ const char* description;
+};
+
+void HelpOptions(const char* group_name, int indentation, int width, struct HelpOption* options, int count)
+{
+ indentation *= 2;
+ char* indent = malloc(indentation+1);
+ memset(indent, ' ', indentation);
+ indent[indentation] = 0;
+ printf("%s%s:\n", indent, group_name);
+ indentation += 2;
+ indent = realloc(indent, indentation+1);
+ memset(indent, ' ', indentation);
+ indent[indentation] = 0;
+
+ int i;
+ for ( i = 0; i < count; i++ )
+ {
+ int printed = printf("%s%-24s ", indent, options[i].name);
+ int descsz = strlen(options[i].description);
+ int j = 0;
+ while ( j < descsz && descsz-j > width - printed )
+ {
+ if ( j != 0 )
+ printf("%s%26c",indent,' ');
+ int fragment = width - printed;
+ while ( fragment > 0 && options[i].description[j+fragment-1] != ' ')
+ fragment--;
+ j += fwrite(options[i].description+j, sizeof(char), fragment, stdout);
+ putchar('\n');
+ printed = indentation+26;
+ }
+ if ( j == 0 )
+ {
+ printf("%s\n",options[i].description+j);
+ }
+ else if ( j < descsz )
+ {
+ printf("%s%26c%s\n",indent,' ',options[i].description+j);
+ }
+ }
+
+ putchar('\n');
+
+ free(indent);
+}
+
+void HelpBsp()
+{
+ struct HelpOption bsp[] = {
+ {"-bsp <filename.map>", "Switch that enters this stage"},
+ {"-altsplit", "Alternate BSP tree splitting weights (should give more fps)"},
+ {"-celshader <shadername>", "Sets a global cel shader name"},
+ {"-custinfoparms", "Read scripts/custinfoparms.txt"},
+ {"-debuginset", "Push all triangle vertexes towards the triangle center"},
+ {"-debugportals", "Make BSP portals visible in the map"},
+ {"-debugsurfaces", "Color the vertexes according to the index of the surface"},
+ {"-deep", "Use detail brushes in the BSP tree, but at lowest priority (should give more fps)"},
+ {"-de <F>", "Distance epsilon for plane snapping etc."},
+ {"-fakemap", "Write fakemap.map containing all world brushes"},
+ {"-flares", "Turn on support for flares (TEST?)"},
+ {"-flat", "Enable flat shading (good for combining with -celshader)"},
+ {"-fulldetail", "Treat detail brushes as structural ones"},
+ {"-leaktest", "Abort if a leak was found"},
+ {"-meta", "Combine adjacent triangles of the same texture to surfaces (ALWAYS USE THIS)"},
+ {"-minsamplesize <N>", "Sets minimum lightmap resolution in luxels/qu"},
+ {"-mi <N>", "Sets the maximum number of indexes per surface"},
+ {"-mv <N>", "Sets the maximum number of vertices of a lightmapped surface"},
+ {"-ne <F>", "Normal epsilon for plane snapping etc."},
+ {"-nocurves", "Turn off support for patches"},
+ {"-nodetail", "Leave out detail brushes"},
+ {"-noflares", "Turn off support for flares"},
+ {"-nofog", "Turn off support for fog volumes"},
+ {"-nohint", "Turn off support for hint brushes"},
+ {"-nosubdivide", "Turn off support for `q3map_tessSize` (breaks water vertex deforms)"},
+ {"-notjunc", "Do not fix T-junctions (causes cracks between triangles, do not use)"},
+ {"-nowater", "Turn off support for water, slime or lava (Stef, this is for you)"},
+ {"-np <A>", "Force all surfaces to be nonplanar with a given shade angle"},
+ {"-onlyents", "Only update entities in the BSP"},
+ {"-patchmeta", "Turn patches into triangle meshes for display"},
+ {"-rename", "Append “bspâ€\9d suffix to miscmodel shaders (needed for SoF2)"},
+ {"-samplesize <N>", "Sets default lightmap resolution in luxels/qu"},
+ {"-skyfix", "Turn sky box into six surfaces to work around ATI problems"},
+ {"-snap <N>", "Snap brush bevel planes to the given number of units"},
+ {"-tempname <filename.map>", "Read the MAP file from the given file name"},
+ {"-texrange <N>", "Limit per-surface texture range to the given number of units, and subdivide surfaces like with `q3map_tessSize` if this is not met"},
+ {"-tmpout", "Write the BSP file to /tmp"},
+ {"-verboseentities", "Enable `-v` only for map entities, not for the world"},
+ };
+ HelpOptions("BSP Stage", 0, 80, bsp, sizeof(bsp)/sizeof(struct HelpOption));
+}
+void HelpVis()
+{
+ struct HelpOption vis[] = {
+ {"-vis <filename.map>", "Switch that enters this stage"},
+ {"-fast", "Very fast and crude vis calculation"},
+ {"-mergeportals", "The less crude half of `-merge`, makes vis sometimes much faster but doesn't hurt fps usually"},
+ {"-merge", "Faster but still okay vis calculation"},
+ {"-nopassage", "Just use PortalFlow vis (usually less fps)"},
+ {"-nosort", "Do not sort the portals before calculating vis (usually slower)"},
+ {"-passageOnly", "Just use PassageFlow vis (usually less fps)"},
+ {"-saveprt", "Keep the PRT file after running vis (so you can run vis again)"},
+ {"-tmpin", "Use /tmp folder for input"},
+ {"-tmpout", "Use /tmp folder for output"},
+ };
+ HelpOptions("VIS Stage", 0, 80, vis, sizeof(vis)/sizeof(struct HelpOption));
+}
+void HelpLight()
+{
+ struct HelpOption light[] = {
+ {"-light <filename.map>", "Switch that enters this stage"},
+ {"-vlight <filename.map>", "Deprecated alias for `-light -fast` ... filename.map"},
+ {"-approx <N>", "Vertex light approximation tolerance (never use in conjunction with deluxemapping)"},
+ {"-areascale <F, `-area` F>", "Scaling factor for area lights (surfacelight)"},
+ {"-border", "Add a red border to lightmaps for debugging"},
+ {"-bouncegrid", "Also compute radiosity on the light grid"},
+ {"-bounceonly", "Only compute radiosity"},
+ {"-bouncescale <F>", "Scaling factor for radiosity"},
+ {"-bounce <N>", "Number of bounces for radiosity"},
+ {"-cheapgrid", "Use `-cheap` style lighting for radiosity"},
+ {"-cheap", "Abort vertex light calculations when white is reached"},
+ {"-compensate <F>", "Lightmap compensate (darkening factor applied after everything else)"},
+ {"-cpma", "CPMA vertex lighting mode"},
+ {"-custinfoparms", "Read scripts/custinfoparms.txt"},
+ {"-dark", "Darken lightmap seams"},
+ {"-debugaxis", "Color the lightmaps according to the lightmap axis"},
+ {"-debugcluster", "Color the lightmaps according to the index of the cluster"},
+ {"-debugdeluxe", "Show deluxemaps on the lightmap"},
+ {"-debugnormals", "Color the lightmaps according to the direction of the surface normal"},
+ {"-debugorigin", "Color the lightmaps according to the origin of the luxels"},
+ {"-debugsurfaces, -debugsurface", "Color the lightmaps according to the index of the surface"},
+ {"-debugunused", "This option does nothing"},
+ {"-debug", "Mark the lightmaps according to the cluster: unmapped clusters get yellow, occluded ones get pink, flooded ones get blue overlay color, otherwise red"},
+ {"-deluxemode 0", "Use modelspace deluxemaps (DarkPlaces)"},
+ {"-deluxemode 1", "Use tangentspace deluxemaps"},
+ {"-deluxe, -deluxemap", "Enable deluxemapping (light direction maps)"},
+ {"-dirtdebug, -debugdirt", "Store the dirtmaps as lightmaps for debugging"},
+ {"-dirtdepth", "Dirtmapping depth"},
+ {"-dirtgain", "Dirtmapping exponent"},
+ {"-dirtmode 0", "Ordered direction dirtmapping"},
+ {"-dirtmode 1", "Randomized direction dirtmapping"},
+ {"-dirtscale", "Dirtmapping scaling factor"},
+ {"-dirty", "Enable dirtmapping"},
+ {"-dump", "Dump radiosity from `-bounce` into numbered MAP file prefabs"},
+ {"-export", "Export lightmaps when compile finished (like `-export` mode)"},
+ {"-exposure <F>", "Lightmap exposure to better support overbright spots"},
+ {"-external", "Force external lightmaps even if at size of internal lightmaps"},
+ {"-extravisnudge", "Broken feature to nudge the luxel origin to a better vis cluster"},
+ {"-extrawide", "Deprecated alias for `-super 2 -filter`"},
+ {"-extra", "Deprecated alias for `-super 2`"},
+ {"-fastbounce", "Use `-fast` style lighting for radiosity"},
+ {"-faster", "Use a faster falloff curve for lighting; also implies `-fast`"},
+ {"-fastgrid", "Use `-fast` style lighting for the light grid"},
+ {"-fast", "Ignore tiny light contributions"},
+ {"-filter", "Lightmap filtering"},
+ {"-floodlight", "Enable floodlight (zero-effort somewhat decent lighting)"},
+ {"-gamma <F>", "Lightmap gamma"},
+ {"-gridambientscale <F>", "Scaling factor for the light grid ambient components only"},
+ {"-gridscale <F>", "Scaling factor for the light grid only"},
+ {"-keeplights", "Keep light entities in the BSP file after compile"},
+ {"-lightmapdir <directory>", "Directory to store external lightmaps (default: same as map name without extension)"},
+ {"-lightmapsize <N>", "Size of lightmaps to generate (must be a power of two)"},
+ {"-lomem", "Low memory but slower lighting mode"},
+ {"-lowquality", "Low quality floodlight (appears to currently break floodlight)"},
+ {"-minsamplesize <N>", "Sets minimum lightmap resolution in luxels/qu"},
+ {"-nocollapse", "Do not collapse identical lightmaps"},
+ {"-nodeluxe, -nodeluxemap", "Disable deluxemapping"},
+ {"-nogrid", "Disable grid light calculation (makes all entities fullbright)"},
+ {"-nolightmapsearch", "Do not optimize lightmap packing for GPU memory usage (as doing so costs fps)"},
+ {"-normalmap", "Color the lightmaps according to the direction of the surface normal (TODO is this identical to `-debugnormals`?)"},
+ {"-nostyle, -nostyles", "Disable support for light styles"},
+ {"-nosurf", "Disable tracing against surfaces (only uses BSP nodes then)"},
+ {"-notrace", "Disable shadow occlusion"},
+ {"-novertex", "Disable vertex lighting"},
+ {"-patchshadows", "Cast shadows from patches"},
+ {"-pointscale <F, `-point` F>", "Scaling factor for point lights (light entities)"},
+ {"-q3", "Use nonlinear falloff curve by default (like Q3A)"},
+ {"-samplescale <F>", "Scales all lightmap resolutions"},
+ {"-samplesize <N>", "Sets default lightmap resolution in luxels/qu"},
+ {"-samples <N>", "Adaptive supersampling quality"},
+ {"-scale <F>", "Scaling factor for all light types"},
+ {"-shadeangle <A>", "Angle for phong shading"},
+ {"-shade", "Enable phong shading at default shade angle"},
+ {"-skyscale <F, `-sky` F>", "Scaling factor for sky and sun light"},
+ {"-smooth", "Deprecated alias for `-samples 2`"},
+ {"-style, -styles", "Enable support for light styles"},
+ {"-sunonly", "Only compute sun light"},
+ {"-super <N, `-supersample` N>", "Ordered grid supersampling quality"},
+ {"-thresh <F>", "Triangle subdivision threshold"},
+ {"-trianglecheck", "Broken check that should ensure luxels apply to the right triangle"},
+ {"-trisoup", "Convert brush faces to triangle soup"},
+ {"-wolf", "Use linear falloff curve by default (like W:ET)"},
+ };
+
+ HelpOptions("Light Stage", 0, 80, light, sizeof(light)/sizeof(struct HelpOption));
+}
+
+void HelpAnalize()
+{
+ struct HelpOption analize[] = {
+ {"-analyze <filename.bsp>", "Switch that enters this mode"},
+ {"-lumpswap", "Swap byte order in the lumps"},
+ };
+
+ HelpOptions("Analyzing BSP-like file structure", 0, 80, analize, sizeof(analize)/sizeof(struct HelpOption));
+}
+void HelpScale()
+{
+ struct HelpOption scale[] = {
+ {"-scale <S filename.bsp>", "Scale uniformly"},
+ {"-scale <SX SY SZ filename.bsp>", "Scale non-uniformly"},
+ {"-scale -tex <S filename.bsp>", "Scale uniformly without texture lock"},
+ {"-scale -tex <SX SY SZ filename.bsp>", "Scale non-uniformly without texture lock"},
+ };
+ HelpOptions("Scaling", 0, 80, scale, sizeof(scale)/sizeof(struct HelpOption));
+}
+void HelpConvert()
+{
+ struct HelpOption convert[] = {
+ {"-convert <filename.bsp>", "Switch that enters this mode"},
+ {"-de <number>", "Distance epsilon for the conversion"},
+ {"-format <converter>", "Select the converter (available: map, ase, or game names)"},
+ {"-ne <F>", "Normal epsilon for the conversion"},
+ {"-shadersasbitmap", "(only for ase) use the shader names as \\*BITMAP key so they work as prefabs"},
+ };
+
+ HelpOptions("Converting & Decompiling", 0, 80, convert, sizeof(convert)/sizeof(struct HelpOption));
+}
+
+void HelpExport()
+{
+ struct HelpOption exportl[] = {
+ {"-export <filename.bsp>", "Copies lightmaps from the BSP to `filename/lightmap_0000.tga` ff"}
+ };
+
+ HelpOptions("Exporting lightmaps", 0, 80, exportl, sizeof(exportl)/sizeof(struct HelpOption));
+}
+
+void HelpFixaas()
+{
+ struct HelpOption fixaas[] = {
+ {"-fixaas <filename.bsp>", "Switch that enters this mode"},
+ };
+
+ HelpOptions("Fixing AAS checksum", 0, 80, fixaas, sizeof(fixaas)/sizeof(struct HelpOption));
+}
+
+void HelpInfo()
+{
+ struct HelpOption info[] = {
+ {"-info <filename.bsp>", "Switch that enters this mode"},
+ };
+
+ HelpOptions("Get info about BSP file", 0, 80, info, sizeof(info)/sizeof(struct HelpOption));
+}
+
+void HelpImport()
+{
+ struct HelpOption import[] = {
+ {"-import <filename.bsp>", "Copies lightmaps from `filename/lightmap_0000.tga` ff into the BSP"},
+ };
+
+ HelpOptions("Importing lightmaps", 0, 80, import, sizeof(import)/sizeof(struct HelpOption));
+}
+
+void HelpMinimap()
+{
+ struct HelpOption minimap[] = {
+ {"-minimap <filename.bsp>", "Creates a minimap of the BSP, by default writes to `../gfx/filename_mini.tga`"},
+ {"-black", "Write the minimap as a black-on-transparency RGBA32 image"},
+ {"-boost <F>", "Sets the contrast boost value (higher values make a brighter image); contrast boost is somewhat similar to gamma, but continuous even at zero"},
+ {"-border <F>", "Sets the amount of border pixels relative to the total image size"},
+ {"-gray", "Write the minimap as a white-on-black GRAY8 image"},
+ {"-keepaspect", "Ensure the aspect ratio is kept (the minimap is then letterboxed to keep aspect)"},
+ {"-minmax <xmin ymin zmin xmax ymax zmax>", "Forces specific map dimensions (note: the minimap actually uses these dimensions, scaled to the target size while keeping aspect with centering, and 1/64 of border appended to all sides)"},
+ {"-nokeepaspect", "Do not ensure the aspect ratio is kept (makes it easier to use the image in your code, but looks bad together with sharpening)"},
+ {"-o <filename.tga>", "Sets the output file name"},
+ {"-random <N>", "Sets the randomized supersampling count (cannot be combined with `-samples`)"},
+ {"-samples <N>", "Sets the ordered supersampling count (cannot be combined with `-random`)"},
+ {"-sharpen <F>", "Sets the sharpening coefficient"},
+ {"-size <N>", "Sets the width and height of the output image"},
+ {"-white", "Write the minimap as a white-on-transparency RGBA32 image"},
+ };
+
+ HelpOptions("MiniMap", 0, 80, minimap, sizeof(minimap)/sizeof(struct HelpOption));
+}
+
+void HelpCommon()
+{
+ struct HelpOption common[] = {
+ {"-connect <address>", "Talk to a NetRadiant instance using a specific XML based protocol"},
+ {"-force", "Allow reading some broken/unsupported BSP files e.g. when decompiling, may also crash"},
+ {"-fs_basepath <path>", "Sets the given path as main directory of the game (can be used more than once to look in multiple paths)"},
+ {"-fs_game <gamename>", "Sets a different game directory name (default for Q3A: baseq3)"},
+ {"-fs_homebase <dir>", "Specifies where the user home directory name is on Linux (default for Q3A: .q3a)"},
+ {"-game <gamename>", "Load settings for the given game (default: quake3)"},
+ {"-subdivisions <F>", "multiplier for patch subdivisions quality"},
+ {"-threads <N>", "number of threads to use"},
+ {"-v", "Verbose mode"}
+ };
+
+ HelpOptions("Common Options", 0, 80, common, sizeof(common)/sizeof(struct HelpOption));
+
+}
+
+void Help(const char* arg)
+{
+ printf("Usage: q3map2 [stage] [common options...] [stage options...] [stage source file]\n");
+ printf(" q3map2 -help [stage]\n\n");
+
+ HelpCommon();
+
+ struct HelpOption stages[] = {
+ {"-bsp", "BSP Stage"},
+ {"-vis", "VIS Stage"},
+ {"-light", "Light Stage"},
+ {"-analize", "Analyzing BSP-like file structure"},
+ {"-scale", "Scaling"},
+ {"-convert", "Converting & Decompiling"},
+ {"-export", "Exporting lightmaps"},
+ {"-fixaas", "Fixing AAS checksum"},
+ {"-info", "Get info about BSP file"},
+ {"-import", "Importing lightmaps"},
+ {"-minimap", "MiniMap"},
+ };
+ void(*help_funcs[])() = {
+ HelpBsp,
+ HelpVis,
+ HelpLight,
+ HelpAnalize,
+ HelpScale,
+ HelpConvert,
+ HelpExport,
+ HelpFixaas,
+ HelpInfo,
+ HelpImport,
+ HelpMinimap
+ };
+
+ if ( arg && strlen(arg) > 0 )
+ {
+ if ( arg[0] == '-' )
+ arg++;
+
+ unsigned i;
+ for ( i = 0; i < sizeof(stages)/sizeof(struct HelpOption); i++ )
+ if ( strcmp(arg, stages[i].name+1) == 0 )
+ {
+ help_funcs[i]();
+ return;
+ }
+ }
+
+ HelpOptions("Stages", 0, 80, stages, sizeof(stages)/sizeof(struct HelpOption));
+}
/*
main()
/* read general options first */
for ( i = 1; i < argc; i++ )
{
+ /* -help */
+ if ( !strcmp( argv[ i ], "-h" ) || !strcmp( argv[ i ], "--help" )
+ || !strcmp( argv[ i ], "-help" ) ) {
+ Help(argv[i+1]);
+ return 0;
+ }
+
/* -connect */
if ( !strcmp( argv[ i ], "-connect" ) ) {
argv[ i ] = NULL;
projects / xonotic / netradiant.git / commitdiff